Precision Air Pressure Control for Extruded Tubing Applications

AC2 Rack Product Overview

The Model AC2 Rack uses the customer’s plant compressed air supply to provide a precision air pressure control for single lumen and multi-lumen tubing. With the AC2, pressure can be controlled and displayed in increments of 0.01 in-H2O. The AC2 is optimized for fast pressure response for the production of straight tubing and Bump and Taper tubing. Bump and Taper tubing control is included standard via analog or digital input. The AC2 Rack system allows for up to 16 Ports in each rack enclosure, controlled by a 10" Color Touchscreen.

AC2 Rack Standard Features and Options

IMG 2
IMG_3260-100

Standard Features

  • Remote Setpoint Change - separate digital inputs Increase/Decrease for Interface to Diameter Gauges and Other Control Equipment
  • All Digital Inputs (10-30VDC Opto- Isolated)
  • High Speed Bump Tubing Control - Analog and Digital Hi/Lo input from customer equipment with independent pressure scaling and trim, from menu
  • Color Touchscreen Interface
  • Rack Enclosure Powder Coated Black

Options

  • Remote Touchscreen with Ethernet Communications
  • Available Fieldbus Interfaces
  • MODBUS TCP
  • Ethernet IP for Logix 5000
  • Other Fieldbus interfaces upon request
  • High Flow Capability

AC2 Rack Air Controller Specifications

Available Pressure Ranges ​(in H2O):
0-1, 0-5, 0-10, 0-20, 0-30, 0-60 Other custom ranges available 		Standard Operating Temperature Range: 32-104 degrees F 
Max Flow Rate​:
0.75 SCFM at 80 psi (Standard) 
1.50 SCFM at 80 psi (High Flow Unit) 		Main Supply Power:
 110 VAC +/- 10% 50/60 Hz
Single Phase (220 VAC Available)
Pressure Display Resolution​:
0.01in H2O  		Air Output Port Connection​:
1/4" Tubing Quick Disconnect
Pressure Repeatability​: +/- 0.01 in H2O Air Supply Connection​: 1/2” Tubing Quick Disconnect 
Enclosure:​ Powder Coated Black Paint
75" High x 23" Wide x 23" Deep 		Operator Interface:
10" Color Touchscreen